Our Email info@aruthventilation.com
FRP Exhaust, HVLS & Cooling, Tarapur MIDC, Boisar
FRP Exhaust Fans, HVLS Fans & Air Coolers for Tarapur Boisar's Chemical Industry
For Tarapur and Boisar's chemical industry, the right ventilation is FRP corrosion-resistant exhaust fans to pull out acid fumes and solvent vapours, HVLS fans to cool large reactor and packing floors against the humid coastal heat, and air coolers for spot relief at workstations. We are Aruth Ventilation Systems, an Ahmedabad-based manufacturer, and we supply and install all three across Tarapur MIDC (Boisar) and the wider Palghar belt. With 230+ installations, FRP exhaust fans up to about 44,000 CFM, IE5 gearless PMSM HVLS fans that cut up to 30% off fan power bills, and a 2-year warranty, every Tarapur job starts with a free on-site survey. Call +91 88665 44445.
Tarapur, in Palghar district around Boisar, is one of Maharashtra's largest chemical and pharma estates, and that single fact decides everything about ventilation here. We have stood inside bulk-drug and intermediate units in Tarapur MIDC where solvent vapour and reactor heat build up together, and inside dye and pigment plants where acid fumes hang in the air near the filtration lines. In this kind of air an ordinary galvanised or mild-steel exhaust fan does not survive. The housing and impeller corrode through in a season, sometimes faster on the coastal side, and the fan you bought for worker safety turns into scrap.
That is why FRP corrosion-resistant exhaust fans and forced ventilation are not a comfort upgrade in Tarapur and Boisar, they are a safety and compliance requirement. For chemical, bulk-drug, dye and intermediate units, FRP exhaust fans physically remove acid fumes and solvent vapour from the breathing zone and help you meet the air-quality and worker-safety norms that MPCB and factory inspectors check. Get this wrong and you put both your people and your licence at risk.
The second problem in Tarapur is plain coastal heat. Boisar sits close to the Arabian Sea, so the air is humid, and from March to June a Tarapur shop floor regularly sits 4 to 6 degrees above the outdoor reading, with the humidity making it feel worse. That is where IE5 gearless PMSM HVLS fans earn their place: a single 7.3 m fan moves a gentle breeze across up to about 20,000 sq.ft on under 1.7 kW, replacing 15 to 20 pedestal fans and cutting heat stress on the line. For plastics, textile and packing units in the estate, that combination of heat plus humidity is the core complaint.
We are honest about how we serve Tarapur. Our workshop is in Satellite, Ahmedabad, so we are not a same-city Boisar shop, but we supply and install all over India, including across Maharashtra, and a Tarapur unit is well within our regular service area. Our team travels in for a free on-site survey, we design the layout, supply the fans, mount and wire them, and come back for service and AMC. Below we break down the Tarapur estate we work in, which Aruth product fixes which local problem, and how the free survey works.
Our range, in motion
What we supply & install in Tarapur / Palghar (Boisar)
HVLS Industrial Fans
Gearless 2.4 to 7.3 m ceiling fans that move huge volumes of air on 1 to 1.7 kW, even, gentle cooling for high-bay sheds and warehouses.
ExploreIndustrial & FRP Exhaust Fans
Heavy-duty and corrosion-proof FRP exhaust fans up to 44,000 CFM to pull out heat, fumes, dust and humidity.
ExploreIndustrial Air Coolers
Honeycomb-pad evaporative coolers from 7,500 to 30,000 m3/h that cool large sheds and factory floors on low power, much cheaper to run than air conditioning.
ExploreMobile & Portable Fans
Spot-cooling mist and man-cooler fans for workstations, assembly lines and loading bays that need targeted airflow.
ExploreCoverage map
Industrial areas we serve around Tarapur / Palghar (Boisar)
We install across these estates and the units inside them, survey, supply, mounting, wiring and after-sales.
Tarapur MIDC (Boisar)
MIDCTarapur MIDC at Boisar is one of Maharashtra's largest chemical and pharma estates, packed with chemicals, bulk-drug and pharma units, dyes and intermediates, engineering and plastics. Acid fumes, solvent vapours and reactor heat corrode ordinary steel fans within a season, so almost every unit here needs FRP corrosion-resistant exhaust fans to clear the fumes from the breathing zone, plus HVLS fans to cool large reactor, granulation and packing floors against Boisar's humid coastal heat.
Which Aruth product solves which Tarapur problem
The short answer for Tarapur and Boisar: FRP exhaust fans for the corrosive chemical, bulk-drug, dye and intermediate units, HVLS fans for general heat and humidity over large floors, and air coolers for spot cooling at workstations. Most Tarapur MIDC factories we fit end up with a combination, because in a chemical and pharma estate the fume load and the coastal heat load stack on top of each other.
The deciding factor is what is actually in your air. If you are pulling out acid fumes or solvent vapour, in a dye unit or a bulk-drug and intermediate plant in Tarapur MIDC, you need FRP corrosion-proof exhaust fans up to about 44,000 CFM, because galvanised and mild-steel fans rust through fast in that air and the salty coastal humidity makes it worse. If the problem is hot, still, humid air over a big plastics, textile or packing shed, HVLS fans are the answer. And for targeted relief on a packing table, QC line, granulation area or loading bay, portable and industrial air coolers do the job without trying to cool the whole building.
Why FRP exhaust fans matter so much in Tarapur and Boisar
FRP exhaust fans matter in Tarapur because the air in a chemical and pharma estate eats ordinary fans. FRP, fibre-reinforced plastic, does not rust or corrode the way galvanised or mild-steel housings and impellers do when they are exposed to acid fumes, chlorine, solvent vapour and the salty, humid coastal air around Boisar. We regularly meet Tarapur units that replace metal exhaust fans every year or two, which is both a recurring cost and a safety gap every time a fan fails between replacements.
A properly sized FRP forced-ventilation system does two jobs at once. It protects your workers by physically removing acid fumes and solvent vapour from the breathing zone, and it keeps you on the right side of MPCB and factory-inspector air-quality norms. Because our FRP bodies do not corrode out, they are covered by our 2-year warranty instead of being a yearly line item, and our engineers size the CFM to your actual floor volume and fume load during the survey, not from a catalogue.
Why Tarapur factories choose Aruth
Tarapur factories choose us because we are a manufacturer, not a reseller, so you get factory pricing, custom FRP sizes and one team for survey, supply, install and after-sales. We build our HVLS fans, industrial and FRP exhaust fans and air coolers at our own workshop at GF-001 Mauryansh Elanza, Shyamal Cross Rd, Satellite, Ahmedabad 380015, which keeps lead times short and spares on the shelf, and it means the people who recommend a layout are the same people who stand behind it.
On the HVLS side the number that moves Tarapur plant owners is the power bill. Our HVLS fans run on IE5 gearless PMSM motors, so a single 7.3 m fan covers up to about 20,000 sq.ft on roughly 1.5 to 1.7 kW, replacing 15 to 20 conventional fans that draw far more and cool far less. Across our installs that works out to up to 30% lower fan-related power consumption. There is no gearbox to leak oil or seize up in the dusty, humid Boisar air, and the 2-year warranty makes the maths simple.
Our free site survey and installation across India, including Maharashtra
Every Tarapur job starts with a free on-site survey, and we supply and install all over India, including across Maharashtra, so distance is not a problem. We are honest that we are based in Ahmedabad and not a same-city Boisar workshop, so our team travels in for the survey, but a Tarapur and Palghar unit is part of our regular service route. An experienced engineer comes to your unit, measures the floor area, roof height, machine and reactor heat load, the fume sources and the openings you already have, then tells you honestly whether you need FRP exhaust, HVLS fans, coolers, or a mix.
You get a written layout, an airflow and CFM calculation, and a quote with no obligation. For a Tarapur MIDC chemical or pharma unit that usually means a clear plan: where the FRP exhaust fans go to pull fumes out, where the HVLS fans go to cool the open floor, and where coolers handle the packing and QC lines. We plan the trip so the survey, fabrication and installation move quickly, and one team handles it end to end. To book your free Tarapur survey, call or message +91 88665 44445.
From the field
Verified installCase study: a Tarapur MIDC bulk-drug unit clears solvent vapour and cuts shed heat
Before — the problem
A bulk-drug and intermediate unit in Tarapur MIDC, Boisar, came to us with two problems stacked on top of each other: their galvanised exhaust fans had corroded through inside a year because of the solvent vapour and humid coastal air, leaving the reactor and granulation floor full of fumes, and the same 19,000 sq.ft shed was running 5 to 6 degrees above the outside temperature through the summer, with the humidity making the packing line miserable.
What Aruth installed
Our team travelled in for a free on-site survey, measured a roof height of about 8.5 m, mapped where the solvent vapour was collecting near the reactor and filtration area, and worked out the CFM the shed actually needed. Our recommendation was a combination: four FRP corrosion-proof exhaust fans, sized at roughly 40,000-plus CFM total, on the process-side wall to pull the acid fumes and solvent vapour out of the breathing zone, plus two 7.3 m IE5 gearless PMSM HVLS fans over the open granulation and packing floor, and two portable coolers for the QC tables.
The result
After installation the fume haze cleared, the floor met the unit's air-quality and safety expectations, and because the HVLS fans replaced roughly 17 pedestal fans the fan-related power dropped sharply against their old setup. The FRP bodies do not corrode, so instead of being a yearly replacement they are covered by our 2-year warranty. We handled survey, fabrication and installation as one team from our Ahmedabad workshop, planning the trip so the Tarapur job moved without out-of-state delay.
Questions
Tarapur / Palghar (Boisar) ventilation FAQs
230+ Companies Trust Our Solutions.
From factories to warehouses, India's top businesses rely on our HVLS fans and industrial air coolers for industrial grade durability and energy savings. Manufactured in our advanced facility, every product meets global ISO standards, Ensuring faster cooling, quieter operation, and 30% lower power costs.
Contact
Ready to improve your industrial ventilation? Get in touch with our experts for customized solutions.
Get Your Custom Quote
Get In Touch
Phone
+91 88665 44445
+91 99787 78767
info@aruthventilation.com
support@aruthventilation.com
Address
GF-001 Mauryansh Elanza, Shyamal Cross Rd,
Nr. Parekh Hospital, Satellite, Ahmedabad 380015
Business Hours
Mon - Fri: 9:00 AM - 6:00 PM
Sat: 9:00 AM - 2:00 PM
Expert Support Team
Our technical experts are ready to help you find the perfect ventilation solution.
Site Visit
Free consultation and assessment
GF-001 Mauryansh Elanza, Shyamal Cross Rd, Nr. Parekh Hospital, Satellite Ahmedabad, Gujarat 380015, India